S1 MODEL
Automatic
robot
- Automatic traction
- Dry and wet cleaning capacity
- Programmable
- Double brush
- Powered by alternating or direct current
- Adaptable 25 cm to diferent panels sizes
- Posibility of interconnecting several devices
- Overcoming jumps
S1 MODEL
automatic robot
automatic robot
- Automatic traction
- Dry and wet cleaning
- Programmable
- Powered by alternating current or direct current
- Double brush
- Overcoming jumps
- Adaptable 25 cm to diferent panel sizes
- Double brush
- With the possibility of interconnecting with several equipment
- Overcoming jumps
- Powered by alternating current or direct current
AUTOMATIC ROBOT WITH PROGRAMMABLE DOUBLE BRUSH SYSTEM. Individual model and interconnected by groups
SERVICE
ABOUT scm
24/7 SUPPORT
We answer the phone 24/7, no matter how much time has passed since the purchase of the cleaning equipment
PERSONALIZATION
Customized design solutions, we offer the best solution whether or not it is done with our equipment.
SUPPLIERS
First level companies with the best technologies and ability to have a global presence
FAQ´S
FREQUENTLY ASKED QUESTIONS
S1 and S2 (automatic solar cleaning robot) ADVANCE 20M/MIN. The K2 (manual solar cleaning robot) IS PUSHED BY A PERSON, IT IS VARIABLE
It depends on the length of the cleaning robot for Solar panels, the power of the panels and
the geometry of the plant. Up to 4 MW with 2 meter robot and 6 MW with 4 meter robot.
The robots have an adaptation tolerance of 250mm. Consult manufacturer for specific cases.
if it is a gap…
- Less than 350 mm, and is the same structure (tracker) or is very aligned, we offer as extra “jump legs” that allows the robot to pass without having to be moved by plant personnel.
- Larger than 350mm and less than 750mm, or if it s moderately aligned, we offer a product “jump tools” that are puncutally fixed to the panels in and allow the robot to pass without having to be moved by plant personnel.
- Very large and/or misaligned, you will have to move the solar panel cleaning equipment by hand.
This is equipment prepared so that electricity and water are transmitted from one robot to another, and only the first of them is connected to water and general power.
AUTOMATIC SOLAR CLEANING ROBOT
LASTS APPROXIMATELY 4 HOURS OF WORK
About 12 hours.
In the best case, regulating the load optimally we talk about 1000 cycles of charge – discharge.
SCM OFFERS WATER TANKS OF DIFFERENT CAPACITIES, WITH A FUEL MOTOR PUMP CAPABLE
OF FEEDING SEVERAL ROBOTS WITH WATER. You can also include an electric generator to
power the robots with light or charge the batteries. These tanks can carry a robot transport
structure, to make their transport in the plant more comfortable.
THE STRENGTHS OF CLEANING ROBOTS FOR SOLAR PANELS ARE: TOP BRANDS,
ROBUSTNESS, LIGHTNESS, VERSATILITY.
related product
Our machinery is focused on recovering the production of the panels in the fastest way, easier to handle and with the least possible water expenditure.
S2 MODEL
AUTOMATIC ROBOT
AUTOMATIC
ROBOT
- Automatic traction
- Dry and water cleaning
- Programmable
- 30% lighter
- Powered by alternating current or direct current
- Double brush
- Double brush
- Adaptable 25 cm to diffetent panel sizes
- Possibility of interconnecting several equipment
- Overcoming jumps
- Powered by alternating current or direct current
contact us
PHOTOVOLTAIC CLEANING EQUIPMENT
D2 Model
Hydraulic arm with a self-regulable brush to be used with a tractor. Does not put weight on the panel.
S1 Model
Automatic programmable robot with double brush system. Individual or interconnected by groups.
K2 Model
Manual robot with double brush system, capable of homogenizing the cleaning carried out by operators. Lightweight and portable.
A1 Model
Cleaning regulable brush to be attached to any articulated excavator arm. Does not put weight on the panel.
S2 Model
Automatic robot with programmable double brush system. Individual model and interconnected by groups
