A1 MODEL
BACKHOE
RETRO EXCAVATOR
- Traction by tracked vehicle
- Easily hooked
- Dry and water cleaning
- Does not put weight on the panel
- Wireless control
- Adjustable sensors
- Antenna overcoming
- Overcoming jumps
-
- fchxd
Adjustable cleaning brush to be attached to any articulated backhoe arm. IT DOES NOT PUT WEIGHT ON THE PANEL.
SERVICE
ABOUT scm
24/7 SUPPORT
We answer the phone 24/7, no matter how much time has passed since the sale of the cleaning equipment.
PERSONALIZATION
Customized design solutions, we offer the best solution whether or not it is done with our equipment.
SUPPLIERS
First level companies with the best technologies and ability to have a global presence.
FAQ´S
FREQUENTLY ASKED QUESTIONS
Both depend on the state of the terrain. In the worst places 800m/h, in the best places up to 2 km/h. An average is 1.5 km/h.
It depends on the length of the brush, the power of the panels and the geometry of the plant. Up to 3.5 MW with 2-meter arm and 5 MW with 4-meter arm.
The 2V model arm can clean 3H.
The 1V model can only clean 1V.
- If it is a space less than 500mm, and it is the same structure (tracker) or is very aligned, it is overcome without any problem.
- If it is a space less than 500 mm and or is moderately aligned, using the option “momentary elevation” distance that allows us to overcome the space without any problem. We get a safety distance that allows us to overcome the space without any problem.
- If it is a very large and/or misaligned space, cleaning will have to stop and continue
immediately.
- TRACTOR WEIGHT: 3500 KG or higher, (It is recommended to ballast the wheels filled with water, or placing counterweights).
- TRACTOR POWER: not a requirement.
- PTO to operate at 450 rpm (required for tank pump).
- RECOMMENDED: Superreducer box (creeper) to reach minimum speeds in the worst sites of the solar plant.
- ELECTRICAL OUTLET: In 12 V cabin.
- FRONT THREE POINTS HITCH: CATEGORY II with lifting capacity 2000 kg.
SCM offers water tanks of different capacities, with tractor PTO pump, capable of feeding the water brush head.
Sensors that allow the arm not to put weight on the panel, and that allows it to overcome spaces between panels.
related product
Our machinery is focused on recovering the production of the plates in the fastest, easiest way to handle and with the least possible water expenditure.
D2MODEL
For tractor
- Traction by tractor vehicle
- Easily hookable
- Dry and water cleaning
- Does not support weight on the panel
- Wireless control
- Adjustable sensor
- Overcoming antennas
- Overcoming jumps
contact us
PHOTOVOLTAIC CLEANING EQUIPMENT
D2 Model
Hydraulic arm with a self-regulable brush to be used with a tractor. Does not put weight on the panel.
K2 Model
Manual robot with double brush system, capable of homogenizing the cleaning carried out by operators. Lightweight and portable.
A1 Model
Cleaning regulable brush to be attached to any articulated excavator arm. Does not put weight on the panel.
S2 Model
Automatic robot with programmable double brush system. Individual model and interconnected by groups
