Efficient cleaning solutions for photovoltaic systems. Since SCM is the only global manufacturer that offers solutions for both hydraulic arms and robots (manual and automatic), so we can advise our customers which is the best solution according to their needs.
S1 & S2 goes 20m/ min. The K2 is pushed by a person, it is variable.
The cleaning solutions we offer for the photovoltaic plants depend on the lenght of the robot, the power of the panels and the geometry of the plant. Up to 4mw with a 2 meters robot and 6 mw with a 4 meters robot.
The robots have an adaptation tolerance of 250mm. Ask the manufacturer for specific cases.
This is equipment prepared so that electricity and water are transmitted from one robot to another, and only the first of them is connected to water and general power.
Approximately 4 hours of work.
About 4 hours.
In the best case, regulating the load optimally we talk about 1000 charge – discharge cycles in cleaning solutions for photovoltaic systems.
SCM offers water tanks of different capacities, with a fuel motor pump capable of feeding several robots with water. You can also include an electric generator to power the robots with light or charge the batteries. These tanks can carry a robot transport structure, to make their transport in the plant more comfortable.
It’s the same as the vehicle. You can adapt it to your needs.
It depends on the length of the brush, the power of the panels and the geometry of the plant. Up to 4MW with 2-meter brush and 6MW with 4-meter brush.
The arms have an adaptation tolerance. Consult us for specific cases.
If the space is small, you don’t need to do anything. The arm goes from one to another by itself.
If the space is bigger, there is a specific button for that.
It connects to the battery and hidraulic system from the vehicle.
We will tell you exactly what you need for you specific model. Usually, it needs few modifications.
We offer water deposits with different capacities, and a water pump adapted for your specific vehicle.
In the best case, regulating the load optimally we talk about 1000 cycles of charge – discharge.
SCM offers water tanks of different capacities, with a fuel motor pump capable of feeding several robots with water. Also, you can include an electric generator to power the robots with light or charge the batteries. These tanks can carry a robot transport structure, to make their transport in the plant more comfortable.
– The robot does not depend on the state of the ground to clean at more or less speed.
– The arm needs fewer operators to be able to operate.
– The robot has a double brush, so its cleaning capacity is greater.
– The vehicle that carries the arm allows you to be more versatile and be able to equip it with machines that allow you to treat the ground (weed trimmer for example).
– The robot can be powered with direct current (batteries) or alternating current (generator).
– The arm works with the hydraulics of the equipment on which it is mounted.
All our equipment consumes around 0.25 L/m2 at 3 bars of water pressure. The consumption is variable depending on the water pressure and the speed of advance of the equipment.
No. It is recommended that the water be of the best possible quality, if possible decalcified. However, our equipment has filters to avoid microparticles that dirty the panels. Check here the best cleaning solutions for photovoltaic installations.
We have certificates from certain panel manufacturers that they ensure that these do not damage them.
All solar cleaning equipment, both robots and hydraulic arms, have one year warranty.
Normally 1000 hours or a year (depends on the weather conditions of the environment, the storage of the equipment, and the type of dirt).
Ability to acquire spare parts for equipment.
You have to call the technical service of SCM or its distributor, who will jointly and immediately make a diagnosis online, and establish an action plan along with the client.
We do not intend to sell a type of product at all costs. Our mission is to offer you the best product based on the different types of problems to solve. We propose the best solution to each client’s problem, whether or not it is done with our equipment.
De acuerdo con lo establecido por la Ley Orgánica 15/1999, de 13 de diciembre, de Protección de Datos de Carácter Personal (LOPD), el cliente/usuario queda informado y presta su consentimiento a la incorporación de sus datos a un fichero del que es responsable SOLAR CLEANING MACHINERY S.L. que ha sido debidamente inscrito en la Agencia Española de Protección de Datos con la finalidad de informarle sobre los productos y servicios solicitados, así como el envío de comunicaciones comerciales sobre los mismos. Le informamos también sobre sus derechos de acceso, rectificación, cancelación y oposición, que podrá ejercer en el domicilio social de SOLAR CLEANING MACHINERY S.L., sito en C/ COSO 51 PLANTA 5 - 50001 ZARAGOZA - ZARAGOZA.
Le informamos también que los datos personales suministrados no serán cedidos ni comunicados, ni siquiera para su conservación, a terceras personas.