Automatic robot for photovoltaic solar cleaning.
Lighter and with the possibility of interconnecting with several equipment.
S2 MODEL
AUTOMATIC ROBOT
AUTOMATIC
ROBOT
- Automatic traction
- Dry and water cleaning
- Programmable
- 30% lighter
- Powered by alternating current or direct current
- Double brush
- Overcoming jumps
- Adaptable 25 cm to diffetent panel sizes
- Double brush
- Possibility of interconnecting several devices
- Overcoming jumps
- Powered by alternating current or direct current
Automatic robot with programmable double brush system. Individual model and interconnected by groups.
SERVICE
ABOUT scm
24/7 SUPPORT
We answer the phone 24/7, no matter how much time has passed since the sale of the cleaning equipment.
PERSONALIZATION
Customized design solutions, we offer the best solution whether or not it is done with our equipment.
SUPPLIERS
First level companies with the best technologies and ability to have a global presence.
SHORT PHRASE WITH A COMPETITIVE ADVANTAGE
TECHNICAL DATA
- The fastest robot on the market: up to XXX M2/h.
- 1 robot= X MW = X dia = one person.
- Easily pass through any gap up to XX cm.
- Specialized pads for cleaning at an angle of XX° with water.
FAQ´S
FREQUENTLY ASKED QUESTIONS
S1 and S2 (automatic solar cleaning robot) ADVANCE 20M/MIN.
THE K2 (manual solar cleaning robot) IT IS PUSHED BY A PERSON, IT IS VARIABLE.
It depends on the length of the cleaning robot for solar panels, the power of the panels and the geometry of the plant. Up to 4 MW with 2 meter robot and 6 MW with 4 meter robot.
The robots have an adaptation tolerance of 250mm. Consult the manufacturer for specific cases.
if it is a space…
- Less than 350 mm, and it is the same structure (tracker) or is very aligned, we offer as an extra “jump legs” that allow the robot to pass without having to be moved by the plant personnel.
- Larger than 350mm, and less than 750mm, or moderately aligned, we offer a product “jump tools” that are puncutally fixed to the panels and allows the robot to pass without having to be moved by plant personnel. Very large and/or misaligned, solar panel cleaning equipment will have to be moved by hand.
This is prepared equipment so that electricity and water are transmitted from one robot to another, and only the first of them is connected to water and general power.
Automatic solar cleaning robot
Lasts approximately 4 hours of work.
About 12 hours.
In the best case, regulating the load optimally we talk about 1000 charge-discharge cycles.
SCM offers water tanks of different capacities, with a fuel motor pump capable of feeding several robots with water.
You can also include an electric generator to power the robots with light or charge the batteries. These tanks can carry a robot transport structure, to make their transport in the plant more comfortable.
The strengths of the cleaning robot for solar panels are:
Top brands, robustness, lightness, versatility.
related product
Our machinery is focused on recovering the production of the panels in the fastest way, easiest to handle and with the least possible water consumption.
RELATED PRODUCT
Our machinery is focused on recovering the production of the plates in the fastest way, easiest to handle and with the least possible water consumption.
K2 MODEL
manual ROBOT
manual
robot
- Manual Traction
- Dry and wet cleaning
- Powered by alternating current or direct current
- Double brush
- Adaptable to 25 cm to different panel sizes
- Overcoming jumps
- Light
contac us
PHOTOVOLTAIC CLEANING EQUIPMENT
D2 Model
Hydraulic arm with a self-regulable brush to be used with a tractor. Does not put weight on the panel.
K2 Model
Manual robot with double brush system, capable of homogenizing the cleaning carried out by operators. Lightweight and portable.
A1 Model
Cleaning regulable brush to be attached to any articulated excavator arm. Does not put weight on the panel.
S2 Model
Automatic robot with programmable double brush system. Individual model and interconnected by groups
